CE-KMTW （20AWG-14AWG）
For Quotation, please click the Contact Us button below.
(1coil/100m≒328ft) Basically 100m MOQ,
Cutting under 100m or Made to order should be confirm with us.
If you need the other sizes please contact with us.
Use
・Wiring to internal equipment and board※
※If you would like to know the detail of how to wiring in USA, you should refer to NFPA70 and NFPA79.
Features
・Global-standard cables designed to CE&UL・cUL &<PS>E（0.75-95mm2）&TR-CU
・Corresponding to NFPA70 and NFPA79（MTW, THW）
・Heat resistance
Temperature range
・Fixed：-25 〜90℃※
※If you use it in temperature less than 0℃ , you should be careful about shocks,flexure, vibration and so on.
Bending radius
・Fixed ： 6 times or more of the cable diameter
RoHS Directive
・Conformity
·Colors of Insulation ：Black, White, Red, Brown, Blue, Gray, Orange, Sky Blue, Green/Yellow, White/Blue, White/Orange
·Green/Yellow ：Green /Yellow stripes (by the circumference, the covered of Green and Yellow is 60 to 40)
·White/Blue ：White/Blue stripes (by the circumference, the covered of White and Blue is 60 to 40)
·White/Orange ：White/Orange stripes (by the circumference, the covered of White and Orange is 60 to 40)
Technical data
Example : 0.75mm2（18AWG）
Construction table
Allowable ampacity
・Allowable ampacity (A) for cable is based on calculation under aerial one-cable and temperature at 30℃ , not representing a guaranteed value.
・Allowable ampacity cable at ambient temperature above 30℃ is to be determined by multiplying the current value by the appropriate current reduction factorin the following table1.
・The allowable ampacity for cable are the calculated by JCS0168, but not guaranteed.
・For details on Allowable ampacity of the cable when used in Europe, refer to the applicable standard“ IEC 60364-5-52 (Electrical installations of buildings -Part 5-52：Selection and erection of electrical equipment - Wiring systems)”
・For details on Allowable ampacity of the cable and Current reduction factors when used in America, refer to the applicable standard“ NFPA79”.
JCS0168…“Calculation of the current rating of power cables for rated voltage up to and including 33kV”
Table1 Current reduction factors
-
Certification:
-
Category:Global Cables
-
Manufacturer:Kuramo
-
Insulator:Heat resistant PVC
Product Description
For Quotation, please click the Contact Us button below.
(1coil/100m≒328ft) Basically 100m MOQ,
Cutting under 100m or Made to order should be confirm with us.
If you need the other sizes please contact with us.
Use
・Wiring to internal equipment and board※
※If you would like to know the detail of how to wiring in USA, you should refer to NFPA70 and NFPA79.
Features
・Global-standard cables designed to CE&UL・cUL &<PS>E（0.75-95mm2）&TR-CU
・Corresponding to NFPA70 and NFPA79（MTW, THW）
・Heat resistance
Temperature range
・Fixed：-25 〜90℃※
※If you use it in temperature less than 0℃ , you should be careful about shocks,flexure, vibration and so on.
Bending radius
・Fixed ： 6 times or more of the cable diameter
RoHS Directive
・Conformity
·Colors of Insulation ：Black, White, Red, Brown, Blue, Gray, Orange, Sky Blue, Green/Yellow, White/Blue, White/Orange
·Green/Yellow ：Green /Yellow stripes (by the circumference, the covered of Green and Yellow is 60 to 40)
·White/Blue ：White/Blue stripes (by the circumference, the covered of White and Blue is 60 to 40)
·White/Orange ：White/Orange stripes (by the circumference, the covered of White and Orange is 60 to 40)
Specifications
Technical data
Example : 0.75mm2（18AWG）
Construction table
Allowable ampacity
・Allowable ampacity (A) for cable is based on calculation under aerial one-cable and temperature at 30℃ , not representing a guaranteed value.
・Allowable ampacity cable at ambient temperature above 30℃ is to be determined by multiplying the current value by the appropriate current reduction factorin the following table1.
・The allowable ampacity for cable are the calculated by JCS0168, but not guaranteed.
・For details on Allowable ampacity of the cable when used in Europe, refer to the applicable standard“ IEC 60364-5-52 (Electrical installations of buildings -Part 5-52：Selection and erection of electrical equipment - Wiring systems)”
・For details on Allowable ampacity of the cable and Current reduction factors when used in America, refer to the applicable standard“ NFPA79”.
JCS0168…“Calculation of the current rating of power cables for rated voltage up to and including 33kV”
Table1 Current reduction factors